Last updated: 2019-02-15

Checks: 6 0

Knit directory: threeprimeseq/analysis/

This reproducible R Markdown analysis was created with workflowr (version 1.2.0). The Report tab describes the reproducibility checks that were applied when the results were created. The Past versions tab lists the development history.


Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

The command set.seed(12345) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

Nice! There were no cached chunks for this analysis, so you can be confident that you successfully produced the results during this run.

Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:


Ignored files:
    Ignored:    .DS_Store
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Ignored:    data/.DS_Store
    Ignored:    data/perm_QTL_trans_noMP_5percov/
    Ignored:    output/.DS_Store

Untracked files:
    Untracked:  KalistoAbundance18486.txt
    Untracked:  analysis/4suDataIGV.Rmd
    Untracked:  analysis/DirectionapaQTL.Rmd
    Untracked:  analysis/EvaleQTLs.Rmd
    Untracked:  analysis/YL_QTL_test.Rmd
    Untracked:  analysis/ncbiRefSeq_sm.sort.mRNA.bed
    Untracked:  analysis/snake.config.notes.Rmd
    Untracked:  analysis/verifyBAM.Rmd
    Untracked:  analysis/verifybam_dubs.Rmd
    Untracked:  code/PeaksToCoverPerReads.py
    Untracked:  code/strober_pc_pve_heatmap_func.R
    Untracked:  data/18486.genecov.txt
    Untracked:  data/APApeaksYL.total.inbrain.bed
    Untracked:  data/ApaQTLs/
    Untracked:  data/ChromHmmOverlap/
    Untracked:  data/DistTXN2Peak_genelocAnno/
    Untracked:  data/GM12878.chromHMM.bed
    Untracked:  data/GM12878.chromHMM.txt
    Untracked:  data/LianoglouLCL/
    Untracked:  data/LocusZoom/
    Untracked:  data/NuclearApaQTLs.txt
    Untracked:  data/PeakCounts/
    Untracked:  data/PeakCounts_noMP_5perc/
    Untracked:  data/PeakCounts_noMP_genelocanno/
    Untracked:  data/PeakUsage/
    Untracked:  data/PeakUsage_noMP/
    Untracked:  data/PeakUsage_noMP_GeneLocAnno/
    Untracked:  data/PeaksUsed/
    Untracked:  data/PeaksUsed_noMP_5percCov/
    Untracked:  data/RNAkalisto/
    Untracked:  data/RefSeq_annotations/
    Untracked:  data/TotalApaQTLs.txt
    Untracked:  data/Totalpeaks_filtered_clean.bed
    Untracked:  data/UnderstandPeaksQC/
    Untracked:  data/WASP_STAT/
    Untracked:  data/YL-SP-18486-T-combined-genecov.txt
    Untracked:  data/YL-SP-18486-T_S9_R1_001-genecov.txt
    Untracked:  data/YL_QTL_test/
    Untracked:  data/apaExamp/
    Untracked:  data/apaQTL_examp_noMP/
    Untracked:  data/bedgraph_peaks/
    Untracked:  data/bin200.5.T.nuccov.bed
    Untracked:  data/bin200.Anuccov.bed
    Untracked:  data/bin200.nuccov.bed
    Untracked:  data/clean_peaks/
    Untracked:  data/comb_map_stats.csv
    Untracked:  data/comb_map_stats.xlsx
    Untracked:  data/comb_map_stats_39ind.csv
    Untracked:  data/combined_reads_mapped_three_prime_seq.csv
    Untracked:  data/diff_iso_GeneLocAnno/
    Untracked:  data/diff_iso_proc/
    Untracked:  data/diff_iso_trans/
    Untracked:  data/ensemble_to_genename.txt
    Untracked:  data/example_gene_peakQuant/
    Untracked:  data/explainProtVar/
    Untracked:  data/filtPeakOppstrand_cov_noMP_GeneLocAnno_5perc/
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.bed
    Untracked:  data/filtered_APApeaks_merged_allchrom_refseqTrans.closest2End.noties.bed
    Untracked:  data/first50lines_closest.txt
    Untracked:  data/gencov.test.csv
    Untracked:  data/gencov.test.txt
    Untracked:  data/gencov_zero.test.csv
    Untracked:  data/gencov_zero.test.txt
    Untracked:  data/gene_cov/
    Untracked:  data/joined
    Untracked:  data/leafcutter/
    Untracked:  data/merged_combined_YL-SP-threeprimeseq.bg
    Untracked:  data/molPheno_noMP/
    Untracked:  data/mol_overlap/
    Untracked:  data/mol_pheno/
    Untracked:  data/nom_QTL/
    Untracked:  data/nom_QTL_opp/
    Untracked:  data/nom_QTL_trans/
    Untracked:  data/nuc6up/
    Untracked:  data/nuc_10up/
    Untracked:  data/other_qtls/
    Untracked:  data/pQTL_otherphen/
    Untracked:  data/peakPerRefSeqGene/
    Untracked:  data/perm_QTL/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov/
    Untracked:  data/perm_QTL_GeneLocAnno_noMP_5percov_3UTR/
    Untracked:  data/perm_QTL_opp/
    Untracked:  data/perm_QTL_trans/
    Untracked:  data/perm_QTL_trans_filt/
    Untracked:  data/protAndAPAAndExplmRes.Rda
    Untracked:  data/protAndAPAlmRes.Rda
    Untracked:  data/protAndExpressionlmRes.Rda
    Untracked:  data/reads_mapped_three_prime_seq.csv
    Untracked:  data/smash.cov.results.bed
    Untracked:  data/smash.cov.results.csv
    Untracked:  data/smash.cov.results.txt
    Untracked:  data/smash_testregion/
    Untracked:  data/ssFC200.cov.bed
    Untracked:  data/temp.file1
    Untracked:  data/temp.file2
    Untracked:  data/temp.gencov.test.txt
    Untracked:  data/temp.gencov_zero.test.txt
    Untracked:  data/threePrimeSeqMetaData.csv
    Untracked:  data/threePrimeSeqMetaData55Ind.txt
    Untracked:  data/threePrimeSeqMetaData55Ind.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup.xlsx
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.txt
    Untracked:  data/threePrimeSeqMetaData55Ind_noDup_WASPMAP.xlsx
    Untracked:  output/picard/
    Untracked:  output/plots/
    Untracked:  output/qual.fig2.pdf

Unstaged changes:
    Modified:   analysis/28ind.peak.explore.Rmd
    Modified:   analysis/CompareLianoglouData.Rmd
    Modified:   analysis/NewPeakPostMP.Rmd
    Modified:   analysis/apaQTLoverlapGWAS.Rmd
    Modified:   analysis/cleanupdtseq.internalpriming.Rmd
    Modified:   analysis/coloc_apaQTLs_protQTLs.Rmd
    Modified:   analysis/dif.iso.usage.leafcutter.Rmd
    Modified:   analysis/diff_iso_pipeline.Rmd
    Modified:   analysis/explainpQTLs.Rmd
    Modified:   analysis/explore.filters.Rmd
    Modified:   analysis/flash2mash.Rmd
    Modified:   analysis/mispriming_approach.Rmd
    Modified:   analysis/overlapMolQTL.Rmd
    Modified:   analysis/overlapMolQTL.opposite.Rmd
    Modified:   analysis/overlap_qtls.Rmd
    Modified:   analysis/peakOverlap_oppstrand.Rmd
    Modified:   analysis/peakQCPPlots.Rmd
    Modified:   analysis/pheno.leaf.comb.Rmd
    Modified:   analysis/pipeline_55Ind.Rmd
    Modified:   analysis/swarmPlots_QTLs.Rmd
    Modified:   analysis/test.max2.Rmd
    Modified:   analysis/test.smash.Rmd
    Modified:   analysis/understandPeaks.Rmd
    Modified:   code/Snakefile

Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.


These are the previous versions of the R Markdown and HTML files. If you’ve configured a remote Git repository (see ?wflow_git_remote), click on the hyperlinks in the table below to view them.

File Version Author Date Message
html b9cce4b Briana Mittleman 2018-12-05 Build site.
Rmd e230640 Briana Mittleman 2018-12-05 add code to save relevant figures
html bbd632b Briana Mittleman 2018-09-25 Build site.
Rmd 66570c5 Briana Mittleman 2018-09-25 PAS per gene
html d3bb287 Briana Mittleman 2018-09-24 Build site.
Rmd f7934ce Briana Mittleman 2018-09-24 wflow_publish(c(“index.Rmd”, “39indQC.Rmd”))

I will use this to look at the map stats and peak stats for the full set of 39 ind.

library(tidyverse)
── Attaching packages ───────────────────────────────────────────────────────────── tidyverse 1.2.1 ──
✔ ggplot2 3.0.0     ✔ purrr   0.2.5
✔ tibble  1.4.2     ✔ dplyr   0.7.6
✔ tidyr   0.8.1     ✔ stringr 1.4.0
✔ readr   1.1.1     ✔ forcats 0.3.0
Warning: package 'stringr' was built under R version 3.5.2
── Conflicts ──────────────────────────────────────────────────────────────── tidyverse_conflicts() ──
✖ dplyr::filter() masks stats::filter()
✖ dplyr::lag()    masks stats::lag()
library(workflowr)
This is workflowr version 1.2.0
Run ?workflowr for help getting started
library(reshape2)

Attaching package: 'reshape2'
The following object is masked from 'package:tidyr':

    smiths
library(cowplot)

Attaching package: 'cowplot'
The following object is masked from 'package:ggplot2':

    ggsave
library(tximport)

Map Stats

mapstats= read.csv("../data/comb_map_stats_39ind.csv", header = T, stringsAsFactors = F)
mapstats$line=as.factor(mapstats$line)
mapstats$fraction=as.factor(mapstats$fraction)
map_melt=melt(mapstats, id.vars=c("line", "fraction"), measure.vars = c("comb_reads", "comb_mapped", "comb_prop_mapped"))

prop_mapped= map_melt %>% filter(variable=="comb_prop_mapped")
mapped_reads= map_melt %>% filter(variable=="comb_mapped")


mapplot_prop=ggplot(prop_mapped, aes(y=value, x=line, fill=fraction)) + geom_bar(stat="identity",position="dodge") + labs( title="Proportion of reads mapped") + ylab("Proportion mapped")


mapplot_mapped=ggplot(mapped_reads, aes(y=value, x=line, fill=fraction)) + geom_bar(stat="identity",position="dodge") + labs( title="Number of Mapped reads") + ylab("Mapped")

plot_grid(mapplot_prop, mapplot_mapped)

Version Author Date
b9cce4b Briana Mittleman 2018-12-05
d3bb287 Briana Mittleman 2018-09-24

Plot boxplots for total vs nuclear.

box_mapprop=ggplot(prop_mapped, aes(y=value, x=fraction, fill=fraction)) + geom_boxplot(width=.3) + geom_jitter(position = position_jitter(.3)) + labs( title="Map Proportion") + ylab("Mapped Proportion") + scale_fill_manual(values=c("deepskyblue3","darkviolet"))

box_map=ggplot(mapped_reads, aes(y=value, x=fraction, fill=fraction)) + geom_boxplot(width=.3) + geom_jitter(position = position_jitter(.3)) + labs( title="Number of Mapped reads") + ylab("Mapped") + scale_fill_manual(values=c("deepskyblue3","darkviolet"))


bothmapplots=plot_grid(box_map, box_mapprop)
bothmapplots

Version Author Date
b9cce4b Briana Mittleman 2018-12-05
d3bb287 Briana Mittleman 2018-09-24
ggsave("../output/plots/MapBoxplots.png",bothmapplots)
Saving 7 x 5 in image

Genes with multiple peaks

This is similar to the analysis I ran in dataprocfigures.Rmd. I start by overlappping the refseq genes with my peaks. With the script refseq_countdistinct.sh.

namesPeak=c("Chr", "Start", "End", "Name", "Score", "Strand", "numPeaks")
Opeakpergene=read.table("../data/peakPerRefSeqGene/filtered_APApeaks_perRefseqGene_oppStrand.txt", stringsAsFactors = F, header = F, col.names = namesPeak) %>% mutate(onePeak=ifelse(numPeaks==1, 1, 0 )) %>%  mutate(multPeaks=ifelse(numPeaks > 1, 1, 0 ))

Ogenes1peak=sum(Opeakpergene$onePeak)/nrow(Opeakpergene) 
OgenesMultpeak=sum(Opeakpergene$multPeaks)/nrow(Opeakpergene)
Ogenes0peak= 1- Ogenes1peak - OgenesMultpeak


OperPeak= c(round(Ogenes0peak,digits = 3), round(Ogenes1peak,digits = 3),round(OgenesMultpeak, digits = 3))
Category=c("Zero", "One", "Multiple")
OperPeakdf=as.data.frame(cbind(Category,OperPeak))

OperPeakdf$OperPeak=as.numeric(as.character(OperPeakdf$OperPeak))

Olab1=paste("Genes =", Ogenes0peak*nrow(Opeakpergene), sep=" ")
Olab2=paste("Genes =", sum(Opeakpergene$onePeak), sep=" ")
Olab3=paste("Genes =", sum(Opeakpergene$multPeaks), sep=" ")

Ogenepeakplot=ggplot(OperPeakdf, aes(x="", y=OperPeak, by=Category, fill=Category)) + geom_bar(stat="identity")+ labs(title="Characterize Refseq genes by number of PAS- Oppstrand", y="Proportion of Protein Coding gene", x="")+ scale_fill_brewer(palette="Paired") + coord_cartesian(ylim=c(0,1)) + annotate("text", x="", y= .2, label=Olab1) + annotate("text", x="", y= .4, label=Olab2) + annotate("text", x="", y= .9, label=Olab3)
Ogenepeakplot

Version Author Date
b9cce4b Briana Mittleman 2018-12-05
bbd632b Briana Mittleman 2018-09-25

I will now repull in the RNA seq data for one of my lines to look at the expression levels of the genes with at least 1 called peak.

tx2gene=read.table("../data/RNAkalisto/ncbiRefSeq.txn2gene.txt" ,header= F, sep="\t", stringsAsFactors = F)

txi.kallisto.tsv <- tximport("../data/RNAkalisto/abundance.tsv", type = "kallisto", tx2gene = tx2gene)
Note: importing `abundance.h5` is typically faster than `abundance.tsv`
reading in files with read_tsv
1 
removing duplicated transcript rows from tx2gene
transcripts missing from tx2gene: 99
summarizing abundance
summarizing counts
summarizing length
txi.kallisto.tsv$abundance= as.data.frame(txi.kallisto.tsv$abundance) %>% rownames_to_column(var="Name")
colnames(txi.kallisto.tsv$abundance)= c("Name", "TPM")
#genes with >0 TPM and at least 1 peak
refPeakandRNA_withO_TPM=Opeakpergene %>% inner_join(txi.kallisto.tsv$abundance, by="Name") %>% filter(TPM>0, numPeaks>0)

#genes with >0  TPM and 0 peak
refPeakandRNA_noPeakw_withO_TPM=Opeakpergene %>% inner_join(txi.kallisto.tsv$abundance, by="Name") %>% filter(TPM >0, numPeaks==0) 

#plot
plot(sort(log10(refPeakandRNA_withO_TPM$TPM), decreasing = T), main="Distribution of RNA expression 18486", ylab="log10 TPM", xlab="Refseq Gene")
points(sort(log10(refPeakandRNA_noPeakw_withO_TPM$TPM), decreasing = T), col="Red")
legend("topright", legend=c("Genes wth Peak", "Genes without Peak"), col=c("black", "red"),pch=19)

Version Author Date
b9cce4b Briana Mittleman 2018-12-05
bbd632b Briana Mittleman 2018-09-25

Plot this as distributions.

comp_RNAtpm=ggplot(refPeakandRNA_withO_TPM, aes(x=log10(TPM))) + geom_histogram(binwidth=.5, alpha=.5) +geom_histogram(data = refPeakandRNA_noPeakw_withO_TPM, aes(x=log10(TPM)), fill="Red", alpha=.5, binwidth=.5) + labs(title="Comparing RNA expression for genes with a PAS vs no PAS") + annotate("text", x=-8, y=3000, col="Red", label="Genes without PAS") + annotate("text", x=-8.1, y=2700, col="Black", label="Genes with PAS") + geom_rect(linetype=1, xmin=-10, xmax=-6, ymin=2500, ymax=3200, color="Black", alpha=0)
comp_RNAtpm

Version Author Date
b9cce4b Briana Mittleman 2018-12-05
bbd632b Briana Mittleman 2018-09-25
ggsave("../output/plots/QC_plots/TPMcoverage4GenesbyPAS.png",comp_RNAtpm)
Saving 7 x 5 in image


sessionInfo()
R version 3.5.1 (2018-07-02)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS  10.14.1

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
 [1] bindrcpp_0.2.2  tximport_1.8.0  cowplot_0.9.3   reshape2_1.4.3 
 [5] workflowr_1.2.0 forcats_0.3.0   stringr_1.4.0   dplyr_0.7.6    
 [9] purrr_0.2.5     readr_1.1.1     tidyr_0.8.1     tibble_1.4.2   
[13] ggplot2_3.0.0   tidyverse_1.2.1

loaded via a namespace (and not attached):
 [1] tidyselect_0.2.4   haven_1.1.2        lattice_0.20-35   
 [4] colorspace_1.3-2   htmltools_0.3.6    yaml_2.2.0        
 [7] rlang_0.2.2        pillar_1.3.0       glue_1.3.0        
[10] withr_2.1.2        RColorBrewer_1.1-2 modelr_0.1.2      
[13] readxl_1.1.0       bindr_0.1.1        plyr_1.8.4        
[16] munsell_0.5.0      gtable_0.2.0       cellranger_1.1.0  
[19] rvest_0.3.2        evaluate_0.13      labeling_0.3      
[22] knitr_1.20         broom_0.5.0        Rcpp_0.12.19      
[25] scales_1.0.0       backports_1.1.2    jsonlite_1.6      
[28] fs_1.2.6           hms_0.4.2          digest_0.6.17     
[31] stringi_1.2.4      grid_3.5.1         rprojroot_1.3-2   
[34] cli_1.0.1          tools_3.5.1        magrittr_1.5      
[37] lazyeval_0.2.1     crayon_1.3.4       whisker_0.3-2     
[40] pkgconfig_2.0.2    xml2_1.2.0         lubridate_1.7.4   
[43] assertthat_0.2.0   rmarkdown_1.11     httr_1.3.1        
[46] rstudioapi_0.9.0   R6_2.3.0           nlme_3.1-137      
[49] git2r_0.24.0       compiler_3.5.1